Jeg vil gerne bruge output X4 og X5 på henriks print, til styring af hhv. -
- Shiftlight (dvs. egentlig el-tilkobling af kompresser ved 2000 omdr.)
og
- Fan control..
Hvordan kan jeg sætte det op i Megatune ? -
Jeg ville være glad for hjælpen.
På forhånd mange tak.
VH Mikkel Amby.
Brug af Output X4 og X5 på HenrikGM's print
Redaktør: Moderatorer
-
mikkel
- Nyt Medlem
- Indlæg: 35
- Tilmeldt: 20 sep 2005, 10:53
- Geografisk sted: Ringkøbing Vestjylland.
- Kontakt:
-
HenrikGM
- Moderator
- Indlæg: 7414
- Tilmeldt: 01 jan 1970, 01:00
- Kontakt:
Re: Brug af Output X4 og X5 på HenrikGM's print
mikkel skrev:Jeg vil gerne bruge output X4 og X5 på henriks print, til styring af hhv. -
- Shiftlight (dvs. egentlig el-tilkobling af kompresser ved 2000 omdr.)
og
- Fan control..
Hvordan kan jeg sætte det op i Megatune ? -
Jeg ville være glad for hjælpen.
På forhånd mange tak.
VH Mikkel Amby.
Vælg x4 on
Vælg rpm
vælg rpm/100, feks 40=4000rpm
Vupti.
Vælg x5 on
Vælg clt
vælg temp den skal tænde ved.
Vupti.
Nemt ,ikke?
Udgangene lægger til stel v. aktivering.
Henrik
http://boost-it.dk
Citat:My experience tells me that once the cam with the lumpy idle is selected, the thinking mostly stops. Decisions then are based on lowest price, looks, ease of installation, coolness factor, the 'latest thing' syndrome, peer pressure, old wives tales, and bad advice.
Citat slut.
Hold kæft hvor er det sandt!
http://boost-it.dk
Citat:My experience tells me that once the cam with the lumpy idle is selected, the thinking mostly stops. Decisions then are based on lowest price, looks, ease of installation, coolness factor, the 'latest thing' syndrome, peer pressure, old wives tales, and bad advice.
Citat slut.
Hold kæft hvor er det sandt!